The Digi Back Cleaning System offers a two part cleaning process to remove all types of dust, dirt and contamination:
Part ONE: Contact-Free removal of dust and loose particles with anti-static effect
Part TWO: Safe removal of dirt and smudges with a specially formulated cleaning fluid and Silky Wipe cloth
INCLUDED in the Digi Back Cleaning System:
- 1x G-2051 Air + Vacuum Power HI-TECH (400ml) (Air Duster Can)
1x V-2100 Anti-Static Set (Dusting Tool) = Top Ventil with Anti-Static Thunderon® brush
- 10x T-1020 Silky Wipe (8 x 8 cm, individually sealed, cloths)
- 1x Green Clean Digital Back Cleaning Liquid (15 ml)
HOW THE DIGI BACK CLEANING SYSTEM WORKS:
All digital capture sensors (CCD & CMOS) have sensitive surfaces which are best left un-touched and contact-free cleaning methods are best! Sensors have a current going through them when in use create a static charge that attracts dust, fluff and abrasions.
These are all easily removed by using STEP ONE of the ANTISTATIC SET:
The basis for this is the Air + Vacuum Power HI-TECH Air Duster Can, fitted with the high quality Anti-Static Set Dusting Tool comprising of the Top Ventil and Anti-Static brush with Thunderon® filaments.
Thunderon® has the ability to neutralize static charges, therefore you are blowing away the loose particles, while at the same time removing the static charge of the sensor surface.
The special qualities of this brush are life-long and only if it becomes very dirty does it loose its anti-static abilities.
If after STEP ONE the sensor surface is not completely clean and some seemingly 'Welded On' particles or smudges are present then STEP TWO is implemented:
A drop of the specially formulated cleaning liquid is applied to the sensor surface and the specially designed, ultra-soft Silky Wipe cleanig cloth is used to spread the liquid over the sensor surface and eventually wiped off. No residue will remain after this! NOTE: The Silky Wipe is individually sealed and is used once only to prevent contamination and therefore dirt transfer.
ABOUT THE Digital Back Cleaning Liquid:
The special Green Clean Digital Back Cleaning Liquid does not contain alcohol or aggressive cleaning substances, but is able to dissolve fatty/oily substances and other residual dirt. It is important that the cleaning liquid does not dissolve grime instantly (as do alcohol based products), but that they evaporate slowly do give enough time for the Silky Wipe to spread the liquid and dissolve all dirt before evaporation and absorption into the cloth.
ABOUT THE Silky Wipe Cleaning Cloth:
The Silky Wipe is made from a particularly flat, tightly spun silk derivative and contains no chemical binding materials or bleach. The cloth is extremely soft, yet has the slow absorption qualities necessary to make this particular cleaning process so effective.